IMFIRE FireShield El60

IMFIRE FireShield El60 FIRE CURTAIN

FireShield El60 automatic fire curtains (without irrigation) are designed to separate the local area and prevent the spread of fire throughout the building. The degree of insulation is high because a special material is used. Since it is heat resistant and prevents fire for a long time, it protects person and materials inside from fire and smoke.

Fire resistance limit: 60 minutes without water. When the alarm signal works, the curtain descends automatically with the help of the gravigen system and the effect of the lower strip weight. The ascent is done with the help of an electric motor. By force of the independent battery available, the system maintains its functionality for 72 hours in case of power failure. The descending speed of the curtain is 0.15-0.20 m/s and can be adjusted according to preference. Depending on the customer’s request, a small door (pocket) can also be added.

DIMENSIONS
Maximum width : 7 mt
Maximum height : 5 mt

Box (depth x height) :
For openings less than 4 m high : 200 x 220 mm
For openings more than 4 m high 300 x 330 mm

MATERIAL
Material : Firetex600
Fabric weight : 2500 g/m2
Thickness of material : 3 mm

The inner layer of the three-layer fabric consists of thermoactive composite material that expands up to 50 mm at 160-180°C and provides reliable protection against heat flux.

It has been registered with certificates that the fabric is non-toxic and non-flammable.

BOX
It is made of galvanized steel sheet with a thickness of 1.5 mm. The box is closed on both sides with a lid in order to keep the box contour airtight and to detect the shaft motor torque. The dimensions of the box depend on the dimensions of the closed opening.

Color – can be selected from the RAL chart or can be galvanized steel.

RAILS
It is for guiding the downloaded fabric. It is made of galvanized sheet steel. The main profile thickness is 2 mm, the casing thickness is 1.5 mm.
Color – can be selected from the RAL chart or can be galvanized steel.

ASSEMBLY
Box: Can be mounted in a cavity, ceiling, wall hanger or ceiling hanger.
Rail Mount: In cavity or wall hanger.

https://yanginperdesi.net/